Filter
Top Products
Operating Instructions
134
Automatic Setup (Local or Internet Access) or Manual Setup
1. Click [Execute] on the Camera List window shown on page 133.
2. Click each button to execute the program.
Note
• For the first time installation or after pressing the FACTORY DEFAULT
RESET button, you must select [Automatic Setup (Local Access Only)]. To
start the Manual Setup, execute Automatic Setup (Local Access Only)
first, and then start the Setup Program to execute the Manual Setup.
• See the Installation/Troubleshooting for the local and Internet access
setup.
Manual Setup window
Set up each parameter seeing page 42—page 44.
• If more than 20 minutes have passed since the camera was turned on, the
camera cannot be set up from the Setup Program. If the camera cannot
be set up, restart the camera.
Sets up the camera to view on
the LAN.
Sets up the Internet access to
the camera.
Manually sets up the camera.
Disables IPsec. If disabled, the
button is displayed gray.
Displays the Setup page (see
page 37).