Filter
Top Products
Operating Instructions
66
Setting Description
Camera Name • The camera name is displayed on the Single Camera
page.
• Enter ASCII characters (see page 140) or characters in
each language (1—15 characters for a 1-byte character
and 1—7 characters for a 2-byte character). But [Space],
["], ['], [&], [<], and [>] are not available.
White Balance Select from the following options.
• Auto (default) — Automatic adjustment
• Fixed Indoor — Electric bulb (2800 K)
• Fixed Fluorescent
(White)
— White type fluorescent
light (3600 K)
• Fixed Fluorescent
(Daylight)
— Daylight type fluorescent
light (4000 K)
• Fixed Outdoor — Solar light (6000 K)
•Hold — Setting [Hold] keeps the current
white balance.
Note
White balance is also saved in the home position, alarm
position and preset buttons.
AC Power
Source
Frequency
It can select Flicker Correction by power line frequency.
• 60 Hz (default)
• 50 Hz
Select 60 Hz in the United States.
Automatic
Focus Range
Set to "Macro" when viewing objects that are within 1 m
(39.4 inches) of the camera. Set to "Normal" when viewing
objects that are 1 m (39.4 inches) or further from the camera.
• When positioning the camera in front of a window to view
images on the other side of the window, set the Automatic
Focus Range to "Normal".
Mounting Type Set to match the installation method used to mount the camera.
• When set to "On the ceiling", the available tilt range is 0 to
+90 degrees.
• When set to "On the table", the available tilt range is -120
to 0 degrees.