Filter
Top Products
Operating Instructions
[For assistance, please call: 1-800-272-7033] 27
Registering a Preset Button
8 camera positions can be stored as presets. These buttons can be changed (see
page 29).
• Registered buttons are shown in blue.
• Unregistered buttons are shown in white.
1. Click [Program].
• [Program] switches to [Cancel].
Click [Cancel] to quit without saving
changes.
2. Pan and tilt the camera to a desired
position.
3. Zoom to the desired position.
4. Adjust the focusing if necessary.
5. Click a preset button (1—8) to register.
E.g.:
Setting "UpperLeft" for the preset 1.
6. Enter the preset name.
• Maximum 15 characters.
• Enter ASCII characters (see page
140) or characters in each
language. But [Space], ["], ['], [&], [<]
and [>] are not available.
7. Click [Save] to register, or click [Back]
and [Cancel] to cancel.
• If "Success!" is displayed, click
[Back].
Note
• When registering preset buttons,
the camera also saves brightness
and white balance settings.
• Only an administrator can register
preset buttons.
Program
∗
-+
∗
Preset
Preset Name
Preset (1) Name
Save
Back
UpperLeft
1
Zoom
Focus
ProgramPreset
Scan
Pan / Tilt
∗
-+
Brightness
∗
Alarm
Pan/Tilt
Zoom
Focus
Preset
The button
turns blue.
Setting
a name
Preset
number