Filter
Top Products
Operating Instructions
38
Basic
(1) Network (IPv4) Configures the IPv4 network settings to connect the
camera to the network (see page 40).
(2) Network (IPv6) Configures the IPv6 network settings to connect the
camera to the network (see page 45).
(3) IPsec Enables IPsec (Transport or Tunnel mode) (see page 49).
(4) UPnP Enables automatic port forwarding or shortcut to the
camera (see page 59).
(5) Viewnetcam.
com
Registers with the Viewnetcam.com service (see page 61).
(6) Date and Time Sets the date and time, automatic time adjustment and
adjust clock for daylight saving time settings (see page 63).
(7) Camera Sets camera name, white balance, AC power source
frequency, automatic focus range, mounting type, pan/tilt
range, return to specified position, color night view, and
vertical resolution settings (see page 65).
Account
(8) Administrator
*1
Sets authentication setting and administrator security (user
name and password) (see page 71).
(9) General User
*1
Sets general user security (user name and password) and
general user's access level (see page 75).