Filter
Top Products
Operating Instructions
41
2.3 Network Camera Monitoring
2.3.1 Using the Operation Bar
Pan/Tilt Scan buttons
*1
Pan/Tilt Scan buttons move the lens
horizontally (left and right) or vertically (up and down) all over and
the lens returns to the current position.
Pan/Tilt/Home Position buttons
*1
(Only the Network Camera
with Pan/Tilt feature): Operates the direction of Network Camera.
Preset buttons
*1
( page 42)
Zoom buttons
*1*2
( page 43)
Focus buttons
*1*2
( page 43)
Brightness: Brightness control has nine levels including
STD (Standard).
Resolution: Selects resolution.
[640 x 480], [320 x 240] (default), [160 x 120]
Image Quality: Selects image quality.
• [Clarity]: Optimizes the image quality (the motion will slow
down).
• [Standard]: The standard performance (default).
• [Motion]: Optimizes the motion (The image will be not clear).
*1
Buttons will not be displayed if [Panasonic HCM series without Pan/Tilt] is
selected for Camera Type on Edit Camera window. They also cannot be controlled
if [Disable] is selected on Camera Setup window in Network Camera.
*2
Buttons apply only to Network Camera with zooming and focusing feature. They
will be displayed when selecting [Panasonic HCM series with Zoom] for Camera
Type on Edit Camera window. ( page 36)
Horizontally Vertically
Pan ( : Left, : Right) Tilt ( : Up, : Down)
Home Position ( : Home Position)
[-]: Darkens the image. [STD]: Standard. [+]: Brightens the image.