Filter
Top Products
Operating Instructions
67
3.2 Multi-Camera Recording
Network Camera Recorder records the several Network Cameras simultaneously.
1. Select Network Cameras to record and click [On] or [Motion] to make
recording ready for each Network Camera while stopping monitoring.
• Camera Name will be red (Recording) or green (Motion Detection
Recording).
2. Click Camera Preview in the Camera List to select Network Camera.
Note
When you select several Network Cameras, click Camera Previews while
pressing a [Ctrl] key or a [Shift] key.
3. Select [Control] [Start Selected Cameras] on the menu bar.
• Network Camera Recorder starts recording the images of the selected
Network Camera.
4. Select [Control] [Stop Selected Cameras] on the menu bar to stop
recording.
Note
Network Camera Recorder can record all configured Network Cameras
simultaneously.
1. Follow Step 1 on this page to make recording ready for all Network
Cameras. All Camera Names will be red or green.
2. Click [Start All] or select [Control] [Start All Cameras] on the
menu bar. Network Camera Recorder start recording all images of the
configured Network Cameras.
3. Click [Stop All] or select [Control] [Stop All Cameras] on the
menu bar to stop recording all images of the configured Network
Cameras.