Filter
Top Products
17
Setting Date and Time
Since the internal clock of the Movie Camera has a slight
imprecision, make sure to check the time before recording.
1
Set [OTHER FUNCTIONS] >> [CLOCK SET] >> [ON].
2
Press the [PUSH] Dial to select [YEAR]/[MONTH]/
[DAY]/[HOUR]/[MIN.] and turn to set it to a desired
value.
≥Year will cycle in the order shown below.
2000, 2001, ..., 2089, 1990, ...
3
Press the [MENU] Button to finish setting the date
and time.
≥The clock operation starts from [00] second.
≥The Menu will disappear when the [MENU] Button is pressed
again.
≥If the built-in battery is weak, the [0] Indication
1
flashes. In this
case, charge the built-in battery.
≥The clock employs the 24-hour system.
~~~~~~~~~~~~~~~~~~~~~~
Internal Lithium Battery Recharge
≥The internal lithium battery sustains the operation of the clock.
When the [0] Indication flashes, the internal lithium battery is
near exhaustion.
1
Connect the AC adaptor to the Movie Camera with
the power turned off and then connect to the AC
Mains socket.
≥After charging for 4 hours, the built-in lithium battery can power
the clock for approximately 3 months.
YEAR 2002
MONTH 12
DAY 21
HOUR 14
MIN. 30
PRESS MENU TO RETURN
CLOCK SET
MENU
PUSH
W.B./SHUTTER
IRIS/MF/JOG
1, 3
1, 2
1
1