Filter
Top Products
19
ªRecording Yourself
By opening the LCD Monitor and rotating it frontward (to the lens
side), you can let the subject in front of the Movie Camera monitor
the shot while recording is in progress.
≥When the LCD Monitor is opened, the Viewfinder is disabled
automatically. However, when the LCD Monitor is rotated
frontward, the image is also shown in the Viewfinder.
≥If you prefer to have the image on the LCD Monitor to look like an
image in a mirror, set [SELFSHOOT] on the [OTHER
FUNCTIONS] Sub-Menu to [MIRROR].
Images are recorded normally and no left and right reversal
occurs.
ªRecording with the Built-in Video Light
By using the Built-in Video Light, you can record the scenes in the
dark place.
≥If you Press the [LIGHT] Button
6
for about 1 second, the Built-in
Video Light lights. (The [ ] Indication
7
is displayed.)
≥To turn the Built-in Video Light off, press the [LIGHT] Button for
about 1 second.
≥The subject should be within 2 metres of the Movie Camera.
ªLP Mode
A desired recording speed can be selected with [REC SPEED] on
the [RECORDING SETUP] Sub-Menu.
If LP Mode is selected, the recording time becomes 1.5 times
longer than that of SP Mode.
Although the image quality does not decrease with the LP Mode
recording, mosaic-pattern noise may appear on a playback image,
or some normal functions may be restricted.
≥The contents that are recorded in LP Mode are not completely
compatible with other equipment.
≥Audio dubbing is not possible with LP Mode. (l 35)
ªAudio Recording Mode
The sound quality of the recorded sound can be selected with
[AUDIO REC] on the [RECORDING SETUP] Sub-Menu. High
sound-quality recording is possible with “16 bit 48 kHz 2 track”
Mode. With the “12 bit 32 kHz 4 track” Mode, the original sound can
be recorded on 2 tracks in stereo, while the other 2 tracks can be
used for Audio Dubbing.
≥For other notes concerning this item, see page 46.
6
LIGHT
SIS/
P.B.DIS
FADE
REC
7