Filter
Top Products
25
Recording in Natural Colours
(White Balance)
Depending on the scene or light condition, the Automatic White
Balance Adjustment Mode may not be able to bring out natural
colours. (l 26, 56) In such a case, the white balance can be
adjusted manually.
1 Press the [AUTO/MANUAL] Button to display the
[MNL] Indication.
2 Press the [PUSH] Dial.
≥The [AWB] Indication appears.
3 Turn the [PUSH] Dial to set a desired White
Balance Mode.
1 Automatic White Balance Adjustment [AWB]
2 The white balalnce setting that was previously set manually
[1]
3 Outdoor Mode [z]
4 Indoor Mode (recording under incandescent lamp) [{]
To Resume Automatic Adjustment
Turn the [PUSH] Dial until the [AWB] Indication appears. Or,
press the [AUTO/MANUAL] Button to display the [AUTO]
Indication.
~~~~~~~~~~~~~~~~~~~~~
Adjusting White Balance Manually
For light outside the functional Auto White Balance Adjustment
range, use the Manual White Balance Adjustment Mode.
1 Point the Movie Camera at a full-screen white
subject.
2 Press the [AUTO/MANUAL] Button to display the
[MNL] Indication.
3 Press the [PUSH] Dial.
≥The [AWB] Indication appears.
4 Turn the [PUSH] Dial until the [1] Indication is
displayed.
5 Keep pressing [PUSH] Dial until the [1]
Indication stops flashing.
To Resume Automatic Adjustment
Turn the [PUSH] Dial until the [AWB] Indication is displayed. Or,
press the [AUTO/MANUAL] Button to display the [AUTO]
Indication.
1
1
1
1AWB
12
34
MNL
1
2, 3
AUTO/
MANUAL
PUSH
SHUTTER /
W B / IRIS/
MF / JOG
MNL
1
3, 4, 5
2
1
AUTO/
MANUAL
PUSH
SHUTTER /
W B / IRIS/
MF / JOG
EG-ENG.book 25 ページ ２００３年１月６日 月曜日 午後３時４３分