Filter
Top Products
29
ªWipe Mode and Mix Mode
Wipe Mode:
Like a curtain is being pulled, the still picture of the last recorded
scene gradually changes to the moving image of a new scene.
Mix Mode:
While the moving image of a new scene fades in, the still image
of the last recorded scene gradually fades out.
1 Set [DIGITAL EFFECT] >> [EFFECT] >> [WIPE] or
[MIX].
≥The [WIPE] or [MIX] Indication appears.
2 Press the Recording Start/Stop Button to start
recording.
3 Press the Recording Start/Stop Button to pause
the recording.
≥The last scene is stored in memory. The [WIPE] or [MIX]
Indication changes to [B] or [C].
4 Press the Recording Start/Stop Button to restart
the recording.
≥The last image of the previous scene gradually changes to
the new scene.
ªPicture-in-Picture Mode
You can display a sub-screen (still picture) inside the screen.
1 Set [CAMERA FUNCTIONS] >> [DIGITAL EFFECT]
>> [EFFECT] >> [P-IN-P].
2 Aim the Movie Camera at the scene you want to
capture and press the [STILL] Button.
3 Press the [P-IN-P] Button.
≥A small still picture is displayed in a Normal picture.
≥If the [STILL] Button is pressed again, the small still picture
is cleared.
4 Press the Recording Start/Stop Button or the
[PHOTO SHOT] Button to record on the Cassette.
≥If you turn off the Movie Camera power, Digital Effect
Functions are atuomatically cancelled.
≥For other notes concerning this item, see page 48.
MIX
MIX
MIX
WIPE
WIPE
WIPE
2, 3, 4
1
M
E
N
U
PUSH
SHUTTER /
W B / IRIS/
MF / JOG
1
4
2, 3
4
P-IN-P
M
E
N
U
M-DEL
STILL/
P-IN-P
PHOTO
SHOT
PUSH
SHUTTER /
W B / IRIS/
MF / JOG
EG-ENG.book 29 ページ ２００３年１月６日 月曜日 午後３時４３分