Filter
Top Products
31
MULTI/P-IN-P
ZOOM
INDEX INDEX
SELECT
STORE
STOP
OSD
COUNTER
/REW
STILL ADV
OFF/ON
P.B.DIGITAL
DATE/
TIME
RESET
TITLE
T
W
VOL
REC
MULTI/
P-IN-P
PHOTO
SHOT
START/
STOP
A.DUB
PLAY
PAUSE
FF/
STILL ADV
MENU
ITEM
SET
VAR.
SEARCH
P. B.
ZOOM
PUSH
MENU
4
1,3
1,2
W.B/SHUTTER/IRIS/
VOL/JOG
ªPlaying back with Multi-Picture Mode
Strobe Multi-Picture Mode [STROBE]
1
:
You can capture 9 consecutive still pictures from playback video.
Manual Multi-Picture Mode [MANUAL]
2
:
Selecting a desired still picture one at a time, you can capture 9 still pictures.
Index Multi-Picture Mode ([PHOTO], [SCENE])
3
:
You can capture 9 screens of pictures to which index signals have been
attached.
1
Set [DIGITAL EFFECT] >> [EFFECT 1] >> [MULTI].
2
Set [MULTI-PICTURES] >> [SCAN MODE] >> [STROBE],
[MANUAL], [PHOTO] or [SCENE], whichever mode you
prefer.
When [STROBE] is selected:
≥Set the [SPEED] to a desired strobe speed.
≥At the [FAST] setting, 9 consecutive still pictures is captured within
approximately 1 second, at [NORMAL] within approximately 1.5
seconds, and at [SLOW] within approximately 2 seconds.
≥If you set [SWING] on the [MULTI-PICTURES] Sub-Menu to [ON], the
intervals at which the 9 still pictures are taken are longer at the begining
and end than in the middle of the swing strobe period, and it is useful for
analyzing swing motion,etc.,in sports.
3
Exit the Menu by pressing the [MENU] Button.
4
Play back the tape.
5
Press the [MULTI] Button.
≥If [STROBE] is selected: 9 screnns are automatically captured starting
at the point which the Button is pressed.
≥If [MANUAL] is selected: Press the [MULTI] Button at each scene you
want to capture. When 9 screens are captured, the tape will stop.
≥If [PHOTO] or [SCENE] is selected: From the point at which the
Button is pressed, 9 screens of pictures to which index signals are
attached are captured in the playback direction. After 9 screens are
captured, the tape will stop, but if there are 8 or less pictures to be
captured, the tape will stop at its end.
Deleting all the captured Multi pictures.
While displaying the multi-pictures that have been captured, press the
[MULTI] Button.
≥If [MANUAL] has been selected, press the [MULTI] Button after 9 pictures
are displayed.
To display the Multi-Pictures again.
Press the [MULTI] Button for 1 second or longer.
To Delete Multi pictures one by one
(When Pictures have been captured in Manual Mode)
When the [MULTI] Buttonis pressed for 1 second or longer while the still
pictures are displayed, the pictures captured last is deleted. If you continue
to press the Button,the pictures are deleted consecutively.
≥After still pictures are deleted one by one, they cannot be displayed again.
To Cancel Capturing Pictures (When Pictures have been
captured in Index Mode)
Press the [∫] Button.
To Search the tape position of a desired picture among the
playback pictures displayed on 9 screens.
1
11
1
After displaying pictures in Multi-Picture Mode, turn the
[PUSH] Dial to select the image whose tape position you
want to search.
≥The selected picture blinks at the red frame.
2
22
2
Press the [:] or [9] Button 4
on the Remote
Controller.
≥A still picture playback takes place at the selected picture.
≥For other notes concerning this item, see page 49.