104
LSQT1093
With a computer
When the unit is connected to a computer, it is
recognized as an external drive.
≥[Removable Disk] is displayed in
[My Computer].
Example folder structure of an SD card:
≥JPEG format still pictures (IMGA0001.JPG
etc.) are stored in the [100CDPFP] folder.
These can be opened with picture software that
supports JPEG pictures.
≥Up to 999 files can be recorded in the
[100CDPFP] or other such folder.
≥The DPOF setting files are recorded in the
[MISC] folder.
ª Disk drive display
[Optical Disk Drive] is displayed in
[My Computer], but it cannot be opened on
computers that do not support the AVCHD.
In order to access the drive, you will need a
computer which has had software installed that
supports the AVCHD.
ª Copying still pictures recorded
on the SD card to a computer
Card reader function (mass storage)
When an SD card with recorded data on it is
inserted into the unit and the unit is connected to
a computer using a USB cable, the SD card can
be used as an external drive so that still pictures
on the card can be copied to the computer with
Explorer or other programs.
1 Set the mode dial on the unit to
and connect the unit to the
computer.
[Removable Disk] is displayed in
[My Computer].
2 Double click the folder that
contains the files on the
removable disk ([DCIM]
>
[100CDPFP]).
3 Drag and drop the files onto the
destination folder (on the
computer hard disk).
≥Always use this unit to format SD cards.
≥When data not supported by this unit has been
recorded on a computer, it will not be
recognized by this unit.
About the computer display
DCIM
Removable Disk
100CDPFP
MISC
PC
LSQT1093ENG.book 104 ページ 2007年1月15日 月曜日 午前9時23分