Panasonic DMC-FX07K Digital Camera User Manual


 
Others
107
VQT0Y69
7: The recorded picture looks rough.
Noise appears on the picture.
Is the ISO sensitivity high or the shutter
speed slow?
(ISO sensitivity is set to [AUTO] when
the camera is shipped. Therefore, when
taking pictures indoors etc. the ISO
sensitivity increases.)
Decrease the ISO sensitivity. (P72)
Set [PICT.ADJ.] to [NATURAL]. (P78)
Take pictures in bright places.
In [HIGH SENS.] (P55) in scene mode,
the resolution of the recorded picture
decreases slightly because of high
sensitivity processing.
This is not a malfunction.
8: Motion picture recording stops in the
middle.
Are you using a MultiMediaCard?
This unit does not support
MultiMediaCards.
When you set the picture quality to
[30fpsVGA] or [30fps16:9], we
recommend using a high speed SD
Memory Card with “10MB/s” or greater
displayed on the package.
Depending on the type of SD Memory
Card or SDHC Memory Card, recording
may stop in the middle.
9: A vertical line appears on the LCD
monitor while recording motion
pictures.
This is a phenomenon called smear. It
is a characteristic of CCD and appears
when the subject has a bright part.
Uneven colors may also appear around
the smear. This is not a malfunction. It
is recorded in motion pictures but is not
recorded on still pictures.
LCD monitor
1: The LCD monitor sometimes turns off
although the camera is turned on.
Have you set economy mode? (P21)
In economy mode, the LCD monitor
turns off while the flash is charged.
2: The LCD monitor becomes darker or
brighter for a moment.
This phenomenon appears when you
press the shutter button halfway to set
the aperture value and does not affect
the recorded pictures.
3: The LCD monitor flickers indoors.
The LCD monitor may flicker for a few
seconds after turning the camera on
indoors under fluorescent light.
This is not a malfunction.
4: The LCD monitor is too bright or dark.
Adjust the brightness of the screen. (P20)
Is the power LCD function or high angle
mode activated?
5: Black, red, blue and green dots
appear on the LCD monitor.
These pixels do not affect the recorded
pictures.
This is not a malfunction.
6: Noise appears on the LCD monitor.
In dark places, noise may appear to
maintain the brightness of the LCD
monitor.
This does not affect the pictures you are
recording.
7: A vertical line appears on the LCD
monitor.
This is a phenomenon called smear. It
is a characteristic of CCD and appears
when the subject has a bright part.
Uneven colors may also appear around
the smear. This is not a malfunction. It
is recorded in motion pictures but is not
recorded on still pictures.
VQT0Y69ENG.book 107 ページ 2006年6月30日 金曜日 午前11時7分