Filter
Top Products
Advanced
56
VQT0Y69
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P49)
This mode allows you to take pictures of a
baby with a healthy complexion. When the
flash is used, the light from it is weaker than
usual.
You can set the birthdays of two babies by
using [BABY1] and [BABY2].
• The baby’s age can be displayed when
playing back pictures.
• The age can also be printed on each
picture by using the software [LUMIX
Simple Viewer] in the CD-ROM (supplied).
(For information about printing, refer to the
separate operating instructions for PC
connection.)
∫ Age display setting
• If you want the age to be displayed, set
the birthday in advance, select
[WITH AGE] and press [MENU/SET].
• If you do not want the age to be displayed,
select [WITHOUT AGE] and press
[MENU/SET].
∫ Birthday setting
1 Press 3/4 to select [BIRTHDAY SET.]
and then press [MENU/SET].
2 When the message [PLEASE SET THE
BIRTHDAY OF THE BABY] appears,
select items (Year/Month/Day) using
2/1 and set them using 3/4.
3 Press [MENU/SET] to finish the setting.
• If you select [WITH AGE] without setting
the birthday in advance, a message is
displayed. Press [MENU/SET] and set the
birthday in steps 2 and 3.
• The focus range becomes the same as
macro mode. [5 cm (0.16 feet) (Wide)/
30 cm (0.98 feet) (Tele) to ¶]
• ISO sensitivity is fixed to [ ].
(DMC-FX07)
• After turning on the camera in [BABY1]/
[BABY2] in scene mode or switching to
[BABY1]/[BABY2] from other scene
modes, the age and current date and time
are displayed for about 5 seconds at the
bottom of the screen.
• The age display style differs depending on
the language setting in the recording
mode.
• The display style when printing may differ
slightly from the display style on the
screen.
• The date of birth is displayed as
[0 month 0 day].
• If the age is not properly displayed, check
the clock and birthday settings.
• If the camera is set to [WITHOUT AGE],
the age is not recorded even if the time
and birthday are set. This means the age
cannot be displayed even if camera is set
to [WITH AGE] after taking the pictures.
• Use [RESET] in the [SETUP] menu to
reset the birthday setting. (P22)
[BABY1]/
[BABY2]
1
2
/SET
MENU
BABY1
WITHOUT AGE
BIRTHDAY SET.
WITH AGE
SELECT SET
MENU
CANCEL
1
10:00 DEC. 1.2006
9
months
10
days
3
1
VQT0Y69ENG.book 56 ページ ２００６年６月３０日 金曜日 午前１１時７分