Panasonic DMC-FX07K Digital Camera User Manual


 
Menu Settings
73
VQT0Y69
If you select [ ], digital zoom, auto
bracket and slow shutter cannot be used.
(DMC-FX07)
Depending on the brightness and how fast
the subject is moving, jitter may not be
avoided even if [ ] is selected.
(DMC-FX07)
The camera may not be able to detect the
movement of the subject in the following
cases.
When the moving subject is small
When the moving subject is at the edge
of the screen
When the subject starts moving the
instant the shutter button is pressed fully
ISO sensitivity is automatically set to the
following optimal value in [HIGH SENS.]
(P55) in scene mode.
[ISO3200] (DMC-FX07)
[ISO800] to [ISO1600] (DMC-FX3).
To avoid picture noise, we recommend
decreasing the ISO sensitivity or setting
[PICT.ADJ.] to [NATURAL]. (P78)
ISO sensitivity cannot be set in the
following cases.
Simple mode [ ]
Motion picture mode [ ]
Scene mode
Press [ ] to display the [REC] mode
menu and select the item to set. (P69)
By changing the aspect ratio, you can
select an angle of view that matches the
subject.
In motion picture mode [ ], you can
select [ ] or [ ]. (P63)
The ends of the recorded pictures may be
cut at printing. (P109)
[ASPECT RATIO]
Setting the aspect ratio of pictures
Select to take pictures with the
same aspect ratio as a 4:3 TV or a
PC monitor.
Select to take pictures with the
same 3:2 aspect ratio as 35 mm
film.
This is suitable for landscapes etc.
where a wide view is preferable.
This is also suitable for playing
back pictures on a wide-screen
TV, high-definition TV etc.
/SET
MENU
VQT0Y69ENG.book 73 ページ 2006年6月30日 金曜日 午前11時7分