Panasonic PV-GS31 Camcorder User Manual


 
25
Recording Mode
2/2
About Recording
When recording pictures on a tape, set the Mode
Dial
34
to Tape Recording Mode [ ].
When recording still pictures on a card, set the
Mode Dial
34
to Card Recording Mode [ ].
When recording with the [AUTO/MANUAL/
FOCUS] Switch
26
set to [AUTO], the Camcorder
automatically adjusts the Focus and White
Balance. In some cases, they cannot be adjusted
automatically and need to be adjusted manually.
(pp. 32, 34)
• Before turning on the power, remove the Lens
Cap. If the Lens Cap is still attached when the
power is turned on, Automatic White Balance
Adjustment (p. 32) may not function correctly.
Recording on a Tape
1 Set the [OFF/ON] Switch
28
to [ON].
• The [POWER] Lamp
32
lights up.
2 Set the Mode Dial
34
to Tape Recording
Mode.
4 Press the Recording Start/Stop Button
31
again to pause the recording.
• The [PAUSE] and [ ] Indication appears.
To Check the Recording
26
28
32
34
Recording “ Simultaneous Motion/Still
Record Mode”
3 Press the Recording Start/Stop Button
31
.
• Recording starts.
• The [RECORD] and [Ɣ] Indication appears.
Even if the Mode Dial is set to Tape Recording
Mode and the recording to a tape is in progress,
you can also record a still picture on a card by
pressing the [PHOTO SHOT] Button
25
.
• For the number of still pictures to be recorded on a
card, refer to page 27.
• When recording pictures onto a card, the Recording
Start/Stop Button is disabled.
• You can select a picture quality for still pictures to be
recorded. (p. 26)
• In order to record higher quality still pictures, you
must use the Card Recording Mode.
You can play back the last few seconds of the
recorded scene in the Recording Pause Mode.
SP 3h59m59s29f
R2:00
RECORD
31
SP 3h59m59s29f
R2:00
PAUSE
1 Press the Joystick Control
35
twice to
display the One-Touch Navigation icon on
the lower right of the screen.
[One-Touch Navigation icon]
2 Move the Joystick Control [ź]
35
to select
[ ].
• The [ ] indication is displayed. After checking,
the Camcorder resumes the Recording Pause
Mode.
35
Recording Mode
SP 3h59m59s29f
R2:00
12:34:56AM
JAN 2 2005 100
* These indications are displayed only when the card
is inserted.
1) Recording mode
2) Recording time elapsed
3) Remaining tape indication
4) Still picture size
5) Quality of still pictures
6) Number of recordable still pictures (When no
picture can be recorded, this indication will flash in
red.)
On-screen Display in the Tape
Recording Mode
1)
3)
4)*
5)* 6)*
2)