Filter
Top Products
10
Power Supply
ª Using AC Adaptor
1 Connect the DC Input Lead to the
[DC IN 4.8V] socket on the SD Video
Camera.
2 Connect the AC Adaptor to AC Main
socket.
ª Charging the Battery
1 While holding the [ ] part, slide it
to remove the Battery Compartment
Cover.
2 Press the terminals of the battery onto the
terminals of the Battery Compartment and
set the battery.
≥Fit the battery with its label facing upward.
≥After the battery is set, close the cover.
3 Connect the DC Input Lead to the [DC IN
4.8V] socket on the SD Video Camera.
≥Be sure to turn the power switch on the camera
off when charging the battery.
4 Connect the AC Adaptor to AC Main
socket.
≥Power Lamp flashes 1, and charging starts.
5 Wait until Power Lamp 1 goes off.
≥When recharging is completed, Power Lamp
goes off.
≥Under normal operation the charging light stays on
during charging. If it blinks a charging problem may
be occurring. Please see page 48 for more details.
DC IN 4.8V
2
1
1
2
DC IN 4.8V
1
4
3
AV25PP.book 10 ページ ２００３年１１月２５日 火曜日 午後１２時５分