Filter
Top Products
31
Writing Printing Data on a
Memory Card (DPOF Setting)
DPOF Setting Printing data (DPOF Setting), such as
the number of images to be printed, can be written to
the Memory Card.
1 Play back a still picture to be DPOF-set.
(
l 20)
2 Press the [MENU] Button.
≥The editing menu screen appears.
3 Press the UP/DOWN side of the
Multi-function Button until [DPOF print] is
displayed.
4 Press the LEFT/RIGHT side of the
Multi-function Button to set the number to
be printed and press the [1 SET] Button.
≥When DPOF setting is set to 1 or more, the
[ ] indication appears.
ª To Release All the DPOF Settings
1 Set the Power/Mode Switch to [PLAY] and
set the operation mode to [PICTURE].
2 Press the [MENU] Button.
3 Select [Card editing] and press the
[1 SET] Button.
4 Select [DPOF resetting] and press the
[1 SET] Button.
1
≥A verification message appears.
5 Select [Yes] and press the [1 SET]
Button.
ª To Check the DPOF Settings in Slide
Show
Select [DPOF checking] in Step 4 in
“To Release All the DPOF settings” above
and press the [1 SET] Button. 2
≥DPOF-set images are displayed one by one for
approx. 3 seconds each.
2
1
3,4
MENU
MENU
2
MENU
3,4,5
1
2
1
RECOFF
PLAY
MODE
AV25PP.book 31 ページ ２００３年１１月２５日 火曜日 午後１２時５分