Filter
Top Products
13
LSQT1522
∫ About charging errors
If the status indicator does the following:
Does not flash:
Remove and reinsert the battery, and disconnect
and reconnect the AC adaptor.
If the status indicator still does not flash, contact
your dealer.
Flashes rapidly at approx. 0.25 seconds
intervals:
The battery cannot be charged. Try doing the
following.
≥ Remove and reinsert the battery, and try
recharging the battery.
≥ The battery temperature or surrounding
temperature is too high/low, therefore wait until
the unit and the battery are at suitable
temperatures and try recharging the battery.
If battery charging still does not commence,
contact your dealer.
Flashes slowly at approx. 3 seconds
intervals:
Charging requires time for the following reasons:
≥ The battery has been excessively discharged.
≥ The battery temperature or ambient
temperature is too high/low.
∫ Connecting to the AC outlet
If you turn on this unit while charging the battery
using the AC adaptor, you can use the power
supplied from the AC outlet to power the unit for
use. (While it is in use, the battery will not be
charged.)
SDR-S26GN-LSQT1522_mst.book 13 ページ ２００９年１月６日 火曜日 午後６時５９分