![](http://pdfasset.owneriq.net/7/70/770c2dfd-b172-43ad-88c4-c5b8ff31136c/770c2dfd-b172-43ad-88c4-c5b8ff31136c-bg4d.png)
77
LSQT1522
With a PC
Setup
2
Connection and recognition
After the software is installed, the unit must be connected to the PC and be correctly recognised by the
PC.
≥ Remove the supplied CD-ROM from your PC.
≥ Use the AC adaptor to free you from worrying
about the battery running down.
¬Turn on this unit.
1 Connect this unit to a PC.
The USB function selection screen will appear.
2 Select [PC/RECORDER] and
press the joystick.
This unit is automatically detected by the PC.
≥ When the unit is connected to a PC, its
power cannot be turned off. Disconnect the
USB cable before turning this unit off.
(l 78)
≥ Do not disconnect the USB cable, AC adaptor
or remove the battery while the access lamp is
on or access icon ( ) appears on the LCD
monitor. Doing so may damage the data on the
SD card.
≥ It may be necessary to reboot the PC after
connecting this unit to it for the first time.
When the unit is connected to a PC, it is
recognised as an external drive.
≥ Only the readout of data using the PC can be
performed when the battery is used. (The PC
cannot write data to the unit, or erase data from
the unit.)
≥ Depending on the operating environment of the
PC, the shape of the drive icon and the drive
name will differ.
∫ Drive icons
The icon is displayed in [My Computer
(Computer)].
≥ Windows Vista:
≥ Windows XP:
A USB cable (supplied)
≥ Insert the USB connectors as far as they will
go.
≥ Do not use any other USB cables except the
supplied one. (Operation is not guaranteed with
any other USB cables.)
About the PC display
SDR-S26GN-LSQT1522_mst.book 77 ページ 2009年1月6日 火曜日 午後6時59分