Filter
Top Products
68
LSQT1522
Playback
With other
products
3
With other video devices
≥ Use the AC adaptor to free you from worrying
about the battery running down.
1 Connect this unit to a video
device.
2 Turn on this unit, then rotate the
mode dial to select .
3 Start playback on this unit.
Then start recording on the
connected device.
To stop dubbing
Stop recording on the connected device.
Then stop playback on this unit.
∫ Using SD card slot or USB
terminal of other video devices
If you have a DVD recorder with an SD card slot
or a USB terminal, images recorded by this unit
can be dubbed onto the hard disk or a DVD disc.
Refer to the operating instructions of your DVD
recorder for information about whether or not it
supports dubbing from an SD card or a USB
terminal.
When using a USB terminal
Connect this unit to a DVD recorder with the USB
cable (supplied), then select [PC/RECORDER]
on the USB function selection screen.
≥ For details on how to dub the images, refer to
the operating instructions of the DVD recorder.
Dubbing images onto other
video devices
A AV cable (supplied)
≥ Insert the plugs as far as they will go.
≥ Do not use any other AV cables except
the supplied one.
≥ Select the video input on the video
device and TV that this unit and the
video device are connected to.
VIDEO IN
AUDIO IN
If you dub images and then play them back on
a wide-screen TV, they may be squeezed
horizontally. In this case, refer to the operating
instructions of the device you are dubbing to
or read the operating instructions of the wide-
screen TV and set the aspect setting to 16:9
(Full).
SDR-S26GN-LSQT1522_mst.book 68 ページ ２００９年１月６日 火曜日 午後６時５９分