Filter
Top Products
84 VQT1M21
Others
1
Menus (cont.)
SETUP menu
Item Purpose
DISPLAY Display current information or settings on the LCD monitor.
• Even when [OFF] is set, the operating status, date, world time
and underwater mode displays remain displayed.
DATE/TIME Select the date and time display mode.
DATE FORMAT Select the date display format.
FORMAT CARD Format SD cards.
QUICK START Start recording instantly.
POWER SAVE
Shut off power if the unit is not being operated.
This function does not work in the following cases.
• While using the AC adaptor
• While connected to a computer or printer via USB
AUDIO REC
Set the audio recording mode.
In this unit, the audio mode cannot be changed after recording,
but if MotionSD STUDIO provided with the unit is used, sound can
be recorded on DVD discs using [DOLBY] or on SD cards using
[MPEG].
BEEP SOUND Allow operations such as starting and ending recording to be
signaled by a beep.
When [ON]
Beep: • When recording starts or power is turned on
• When a computer or printer is recognized
Beep-Beep: • When recording stops or power is shut off
Beep-Beep, Beep-Beep … (4 times consecutively):
•
If an error that prevents recording occurs, etc. Check
the message (P.88) that appears on the LCD monitor.
POWER LCD Brighten the LCD monitor more than usual.
LCD SET Adjust brightness or color density of the LCD monitor.
TV ASPECT Display images at the aspect ratio of a connected TV.
EXT. DISPLAY Display information on a connected TV.
RESUME PLAY Continue playback from the point it was stopped.
INITIAL SET Return all settings except for [LANGUAGE] and [CLOCK SET] to
their defaults at the time of purchase.
DEMO MODE Display an introduction to the unit (demonstration mode).
The demonstration stops when any operation except pressing the
[AUTO] or [MANUAL AF/MF] button is performed, but it will resume
if no operations are performed for approx. 10 or more minutes.