Filter
Top Products
88 VQT1M21
Others
3
Messages
Message What to check
CANNOT RECORD. Writing on the SD card failed.
NO DATA.
Neither motion pictures nor still pictures are recorded
on the SD card.
Data is recorded on the SD card, but if this message
appears, the card may be unstable.
Shut power off and turn back on.
THIS CARD
CANNOT RECORD
IN VIDEO MODE.
An 8 MB or 16 MB SD card cannot be used in video
recording mode.
CHECK CARD.
The SD card is not supported or cannot be recognized
by the unit.
CARD LOCKED. The SD card is write-protected. (P.21)
CARD FULL.
The SD card cannot be recorded on because it is full
or the numbers of scenes or numbers of scenes for
the date has reached the maximum. Either delete
unnecessary scenes or insert a new card. (P.56)
SCENE NUMBER IS
FULL
CANNOT RECORD.
THE NUMBER OF
PROGRAM IS FULL.
CARD DOOR
OPENED.
Close the card/battery door.
ERROR
OCCURRED.
RECORDING IS
STOPPED.
Use a Panasonic SD card or other SD card
applicable for motion picture recording. (P.20)
If this message appears when an applicable
card is used, it is recommended to format the
card. Formatting deletes all data on the SD card.
Therefore, save data on a computer or other device
before formatting the card.
EXIT THE MENU
THEN CHANGE TO
MANUAL MODE.
Functions that cannot be used simultaneously were
selected. (P.95)
CANCEL MAGICPIX
MODE.