Filter
Top Products
69
LSQT1040
Disc management
Formatting discs
Disc management
Formatting discs
(RAM) (-RW‹VR›) (-RW‹V›)
This is for initializing discs.
≥ Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased.
¬Rotate the mode dial to select .
1 Press the MENU button, then select [ SETUP] #
[FORMATDISC] # [YES] and press the joystick.
≥ When formatting a DVD-RAM, skip to step 3.
2 (When formatting a DVD-RW only)
Select format type (l 19), then press the joystick.
3 When the confirmation message appears, select [YES], then press the
joystick.
≥ When formatting is complete, press the MENU button to exit the message screen.
≥ During formatting, do not turn this unit off.
≥ When you format the disc, use a battery with
sufficient battery power or the AC adaptor.
≥ In the case of a double sided disc, format each side.
≥ It may not be possible to format a disc with many
scratches or dirt. Such discs cannot be used.
≥ Use this unit to format discs. This unit may not
recognize some discs that have been formatted
using a computer or a device other than this unit.
D105(P)eng.book 69 ページ ２００６年１月１６日 月曜日 午後４時１分