Filter
Top Products
74
LSQT1040
With other products
With a TV
With other products
With a TV
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
Images recorded by this unit can be played back on a TV.
≥ Use the AC adaptor to free you from worrying about the battery running down.
1 Connect this unit and a TV.
* If the TV has an S Video terminal, also connect the
S Video plug to it. This allows you to enjoy more
beautiful pictures.
2 Turn on this unit, then rotate the mode dial to select .
3 Change the input channel on the TV.
Example: Set the channel to “VCR2”, etc. (The channel set will differ depending on the terminal
to which the unit is connected.)
4 Start playback on this unit.
The image and audio are output on the TV.
∫ If the image or audio from this unit is not output on the TV
≥ Check that the plugs are inserted as far as they go.
≥ Check the connected terminal.
≥ Check the TV’s input setti ng ( input switch). (For more information, please read the
operating instru c tions for the TV.)
Playback on TV
A AV/S cable (supplied)
≥ Insert the plugs as far as they will go.
VIDEO IN
S VIDEO IN
*
AUDIO IN
A
D105(P)eng.book 74 ページ ２００６年１月１６日 月曜日 午後４時１分