Filter
Top Products
- 103 -
Advanced (Recording pictures)
Note
•
The screen will change as following when the motion picture button is pressed in steps 2 and
3.
¢1 Set [REMAINING DISP.] (P32) to [ ] to display the available recording time before
recording motion pictures.
¢2 The screen that is displayed during Motion Picture Mode setting is different depending on the
setting of the
[REC MODE].
¢3[!] will not be displayed in the Creative Motion Picture Mode.
Start recording by pressing the motion
picture button.
A Available recording time
B Elapsed recording time
• Release the motion picture button right after you press
it.
• The audio is also recorded simultaneously from the
built-in microphone on this unit. (Motion pictures
cannot be recorded without audio.)
• The recording state indicator (red) C will flash while recording motion pictures.
• The screen will become dark momentarily, and recording will start after adjusting the
display.
• Focus can be achieved during recording by pressing [FOCUS].
• Focus can be set manually when [MF] is displaying. (P73)
Stop the recording by pressing the motion picture button again.
• Sound will go off when pressing the motion picture button indicating start/stop of motion
picture recording.
Sound volume can be set in [BEEP LEVEL] (P30).
• If the built-in memory or the card becomes full in the middle of recording, the camera
stops recording automatically.
A Still picture recording
screen
¢1
B Motion Picture Mode
setting
¢2
C Motion picture recording
screen
D Still Picture Mode
setting
¢3
B
A
C
77
R1m17sR1m17s
R1m17s
3s3s
3s