Filter
Top Products
- 35 -
Preparation
• Refer to P64 for details.
• The Auto Review function is activated regardless of its setting when using Auto Bracket (P77),
[HI-SPEED BURST] (P96), [FLASH BURST] (P97) and [PHOTO FRAME] (P101) in Scene
Mode and Burst Mode (P138).
• In Intelligent Auto Mode, the Auto Review function is fixed to [2SEC.].
• If [HIGHLIGHT] (P33) is set to [ON], white saturated areas appear blinking in black and white
when the Auto Review function is activated.
• [AUTO REVIEW] does not work when recording motion pictures.
• The folder number is updated and the file number starts from 0001. (P183)
• A folder number between 100 and 999 can be assigned.
When the folder number reaches 999, the number cannot be reset. We recommend formatting
the card (P38) after saving the data on a PC or elsewhere.
• To reset the folder number to 100, format the built-in memory or the card first and then use this
function to reset the file number.
A reset screen for the folder number will then appear. Select [YES] to reset the folder number.
• When the [RESET] setting is selected during recording, the operation that resets the lens is
also performed at the same time. You will hear the sound of the lens operating but this is
normal and not indicative of malfunctioning.
• When the [REC] Mode settings are reset, data registered with [FACE RECOG.] will be also
reset, too.
• When [SETUP] menu settings are reset, the following settings are also reset. In addition,
[ROTATE DISP.] (P164) is set to [ON].
– The birthday and name settings for [BABY1]/[BABY2] (P94) and [PET] (P95) in Scene Mode.
– The [TRAVEL DATE] (P119) setting. (Departure date, return date, destination)
– The [WORLD TIME] (P122) setting.
– The [CUST. SET MEM.] (P111) setting.
– Position memorized in [LENS RESUME]/[MENU RESUME].
• The folder number and the clock setting are not changed.
[PLAY ON LCD]
If you selected the Viewfinder in a Recording Mode, the display
will automatically switch to the LCD monitor when playing back
the pictures.
[OFF]/[ON]
o [AUTO REVIEW]
Set the length of time that the picture is displayed after taking it.
[OFF]
[1SEC.]
[2SEC.]
[HOLD]: The pictures are displayed until one of the buttons is
pressed.
v [NO.RESET] Reset the file number of the next recording to 0001.
w [RESET]
The [REC] or [SETUP] menu settings are reset to the initial
settings.