Filter
Top Products
Others
- 208 -
• LCD monitor will turn off when [AUTO LCD OFF] (P34) of the [ECONOMY] Mode is activated.
[This does not happen when using the AC adaptor (optional).]
• This phenomenon appears when you press the shutter button halfway to set the aperture value
and does not affect the recorded pictures.
• This phenomenon also appears when the brightness changes when the camera is zoomed or
when the camera is moved. This is because of operation of the automatic aperture of the
camera, and it is not a malfunction.
• The LCD monitor may flicker for a few seconds after turning the camera on indoors under
fluorescent light. This is not a malfunction.
• [POWER LCD] is activated. (P31)
• Does the picture appear on the Viewfinder?
> Press [EVF/LCD] button to switch to LCD monitor display.
• This is not a malfunction.
These pixels do not affect the recorded pictures.
• In dark places, noise may appear to maintain the brightness of the LCD monitor. This does not
affect the pictures you are recording.
• Is the flash closed?
> Press [ OPEN] to open the flash. (P66)
• Flash Mode is not available when Auto Bracket (P77) or [BURST] (P138) in [REC] Mode menu
has been set.
• The flash is activated twice when Red-Eye Reduction (P67) has been set.
• Is it set to [FLASH BURST] (P97) in Scene Mode?
LCD monitor/Viewfinder
The LCD monitor/Viewfinder turns off although the camera is turned on.
The LCD monitor/Viewfinder becomes darker or brighter for a moment.
The LCD monitor flickers indoors.
The LCD monitor is too bright or dark.
The picture is not displayed on the LCD monitor.
Black, red, blue and green dots appear on the LCD monitor.
Noise appears on the LCD monitor.
Flash
The flash is not activated.
The flash is activated multiple times.