Filter
Top Products
- 81 -
Advanced (Recording pictures)
[REC] Mode:
Taking picture by setting the exposure manually
Determine the exposure by manually setting the aperture value and the shutter speed.
Set the mode dial to [²].
• The Manual Exposure Assistance A appears for about 10 seconds.
Rotate the rear dial to set the aperture and
shutter speed.
B Aperture Value
C Shutter Speed
•
It will switch between aperture setting operation and
shutter speed setting operation every time the rear
dial is pressed.
• Focus can be set manually when [MF] is displaying. (P73)
Press the shutter button halfway.
• The Manual Exposure Assistance A appears for
about 10 seconds.
• Set the aperture value and the shutter speed again
when the exposure is not adequate.
Take the picture.
∫ Manual Exposure Assistance
•
The Manual Exposure Assistance is an approximation.
Note
•
Refer to P82 for the available aperture values and the shutter speed.
• The brightness of the LCD monitor/Viewfinder may differ from the brightness of the actual
pictures. Check the pictures using the Playback Mode.
• If the exposure is not adequate, the aperture value and the shutter speed turn red when the
shutter button is pressed halfway.
• [ ] for flash cannot be set.
The exposure is adequate.
Set to faster shutter speed or larger aperture value.
Set to slower shutter speed or smaller aperture value.