Filter
Top Products
2 Monitor images on a cellular phone/mobile
terminal
2.1 Monitor images on a cellular phone
It is possible to connect to the camera using a cellular phone via the Internet and monitor images (JPEG only)
from the camera on the screen of the cellular phone.
IMPORTANT
• When the authentication window is displayed, enter the user name and password. The default user
name and password are as follows.
User name: admin
Password: 12345
To enhance the security, change the password for the user “admin”. (®page 144)
• If the cellular phone in use is not compatible with UTF-8 encode, it is impossible to display the screen
correctly.
• The following are the resolutions that can be displayed depending on “Image capture mode”.
Image capture mode type
Image capture mode Image capture size
1 Monitor (Max. 30 fps) 2M Panorama [16:9] 640x360
320x180
1M Panorama [16:9]
2M Double Panorama [16:9]
1M Double Panorama [16:9]
1.3M Fisheye [4:3] VGA
QVGA
1.3M Quad PTZ [4:3]
1.3M Single PTZ [4:3]
2 Monitor (Max. 15 fps) Panorama + Quad PTZ Quad PTZ, Single PTZ:
VGA
QVGA
Panorama + Single PTZ
Double Panorama + Quad PTZ
Panorama, Double Panorama:
640x360
320x180
Double Panorama + Single PTZ
Quad stream (Max. 30 fps) VGA Quad streams [4:3]
-
3M Fisheye (Max. 15 fps) 3M Fisheye [4:3]
-
Note
• It is necessary to configure the network settings of the cellular phone in advance to connect to the
Internet and monitor images from the camera. (®page 154)
1. Access to “http://IP address/mobile”
*1
or “http://Host name registered in the DDNS server/mobile” using a
cellular phone.
→ Images from the camera will be displayed.
24 Operating Instructions
2 Monitor images on a cellular phone/mobile terminal