Filter
Top Products
11 Configure the settings relating to images and
audio [Image/Audio]
The image setting, JPEG and H.264 image settings, and settings relating to image quality, audio, etc. can be
configured on this page.
The “Image/Audio” page has 4 tabs; the [JPEG/H.264] tab
*1
, the [Image/Position] tab, the [Audio] tab and the
[Cam. Function] tab.
*1
When “Image capture mode” is “VGA Quad streams [4:3]”, the [H.264] tab is displayed.
11.1 Configure the settings relating to images [JPEG/
H.264]
Click the [JPEG/H.264] tab on the “Image/Audio” page. (®page 51, page 53)
The following is a description of “Image capture mode”.
[Image capture mode]
Select an image to be displayed on the “Live” page.
The following “Image capture mode” settings can be configured depending on the mounting position. Refer to
page 9 for further information about each “Image capture mode” setting.
– <Ceiling>
2M Double Panorama [16:9]/ 1M Double Panorama [16:9]/ 1.3M Quad PTZ [4:3]/ 1.3M Single PTZ [4:3]/
Double Panorama + Quad PTZ/ Double Panorama + Single PTZ
– <Wall>
2M Panorama [16:9]/ 1M Panorama [16:9]/ 1.3M Quad PTZ [4:3]/ 1.3M Single PTZ [4:3]/ Panorama + Quad
PTZ/ Panorama + Single PTZ
– <Ceiling/Wall>
3M Fisheye [4:3]/ 1.3M Fisheye [4:3]
– <Ceiling>
VGA Quad streams [4:3]
• Default: 2M Double Panorama [16:9]
IMPORTANT
• For information on images that can be selected in “Image capture mode”, refer to page 9.
• If the “Image capture mode” setting is changed when the following area settings are configured, perform
the area setting again.
– Privacy zone (®page 115)
– VMD area (®page 132)
– VIQS area (®page 117)
– Mask area (®page 106)
Operating Instructions 85
11 Configure the settings relating to images and audio [Image/Audio]