Panasonic WV-SW150 Series Security Camera User Manual


 
[Video encoding format]
SW355
SW355
SW352
SW352
SF346
SF346
SF342
SF342
SF335
SF335
SW316L
SW316L
SW316
SW316
SW314
SW314
SP306
SP306
SP305
SP305
SP302
SP302
NP502
NP502
Select H.264 for the video encoding format.
H.264: H.264 will be set for the video encoding format. The subsequent setting items will be for H.264. The
tab name will be changed to [JPEG/H.264].
MPEG-4: MPEG-4 will be set for the video encoding format. The subsequent setting items will be for
MPEG-4. (®page 86)
The tab name will be changed to [JPEG/MPEG-4].
Default: H.264
H.264(1)/H.264(2)
[H.264 transmission]
Select “On” or “Off” to determine whether or not to transmit H.264 images.
On: Transmits H.264 images.
Off: Does not transmit H.264 images.
Default: On
Note
When “On” is selected for “H.264 transmission” in “H.264(1)” or “H.264(2)”, displaying of H.264 images
or JPEG images on the “Live” page will become available.
When “On” is selected for “H.264 transmission” in “H.264(1)” and “H.264(2)”, H.264 images are
viewable using other devices with each setting.
When “On” is selected for “H.264 transmission” in “H.264(1)” or “H.264(2)”, the transmission interval
of JPEG images may sometimes become longer.
SW355
SW355
SW352
SW352
SF346
SF346
SF342
SF342
SF335
SF335
SW316L
SW316L
SW316
SW316
SP306
SP306
SP305
SP305
SP302
SP302
SW155
SW155
SW152
SW152
SF135
SF135
SF132
SF132
NP502
NP502
SW115
SW115
:
When “H.264” is selected for “Recording format”, it is impossible to transmit H.264 images with the
settings for “H.264(2)”. In this case, the settings for “H.264(2)” are invalidated.
[Internet mode (over HTTP)]
Select “On” when transmitting H.264 images via the Internet. It is possible to transmit H.264 images without
changing the broadband router settings configured for JPEG image transmission.
On: H.264 images and audio will be transmitted using the HTTP port. Refer to page 166 for further
information about the HTTP port number settings.
Off: H.264 images and audio will be transmitted using the UDP port.
Default: Off
Note
When “On” is selected, only “Unicast port (AUTO)” will be available for “Transmission type”.
When “On” is selected, it may take time to start displaying H.264 images.
When “On” is selected, H.264 images may not be displayed depending on the number of the concurrent
access user and audio data availability, etc.
When “On” is selected, only IPv4 access is available.
[Image capture size]
Select the image capture size from the following.
Aspect ratio
SW355
SW355
SW352
SW352
SF346
SF346
SF342
SF342
SF335
SF335
SW316L
SW316L
SW316
SW316
SW314
SW314
SP306
SP306
SP305
SP305
SP302
SP302
SW155
SW155
SW152
SW152
SF135
SF135
SF132
SF132
SP105
SP105
SP102
SP102
SW115
SW115
Operating Instructions 81
11 Configure the settings relating to images and audio [Image/Audio]