Panasonic WV-SW150 Series Security Camera User Manual


 
Note
SW355
SW355
SW352
SW352
SW316L
SW316L
SW316
SW316
SW314
SW314
:
When a faster shutter speed is selected (up to 1/10000), it is possible to capture a fast moving object
with less blur.
When a faster shutter speed is selected, the sensitivity will become lower.
When “On” is selected for “Super Dynamic(SD)”, “Fix shutter” is not available. To configure “Fix
shutter”, set “Super Dynamic(SD)” to “Off”.
SW155
SW155
SW152
SW152
SW115
SW115
:
When a faster shutter speed is selected, flickering may happen.
In case flickering happens, it may be improved by configuring the following settings.
In the area of 50 Hz power supply frequency:
ELC(3/100s), ELC(2/100s), ELC(1/100s)
In the area of 60 Hz power supply frequency:
ELC(3/120s), ELC(2/120s), ELC(1/120s)
When flickering still remains, set flicker-less mode.
Under extremely strong lighting, flickering may happen even when “Indoor scene” is selected for “Light
control mode”.
When the brightness (illuminance) level on the screen is set to a relatively low level with the
[Brightness] buttons, flickering may frequently happen.
When the setting for “Light control mode” is “Indoor scene (50 Hz)”, “Indoor scene (60 Hz)” or “ELC”
whose maximum exposure time is 1/2000s or longer, brightness may not be remarkably changed even
when [Brightness] buttons are clicked.
In such cases, either of the following can reduce flickering.
Moderate the illumination intensities of objects by changing the camera direction.
Set the brightness (illuminance) level on the screen to a brighter level with the [Brightness] buttons.
When “On” is selected for “Super Dynamic(SD)”, only “Indoor scene (50 Hz)”, “Indoor scene (60 Hz)”
and “ELC(1/30s)” are available.
[AGC]
Select a method of gain adjustment from the following.
On(High)/ On(Mid)/ On(Low): When the luminance of the subject becomes darker, gain will be
automatically increased and screen will become brighter. “High”, “Mid” and “Low” are indications of gain
level.
Off: Images will be captured with the fixed gain level.
Default: On(High)
[Auto slow shutter]
The electronic sensitivity enhancement (sensitivity up) can be carried out by adjusting the storage time of the
sensor.
The following are available for the recording duration.
Off(1/30s), Max.2/30s, Max.4/30s, Max.6/30s, Max.10/30s, Max.16/30s
Default: Off(1/30s)
IMPORTANT
When “On” is selected for “Auto slow shutter”, frame rate may become lower. Noise or white dots
(blemishes) may sometimes appear.
Note
When “Max.16/30s” is selected, for example, sensitivity will automatically be increased up to x16. When
“Off” is selected for “AGC”, this setting is unavailable.
SW155
SW155
SW152
SW152
SW115
SW115
:
Operating Instructions 97
11 Configure the settings relating to images and audio [Image/Audio]