Filter
Top Products
24
IMPORTANT:
• WheninsertinganSDmemorycard,makesurethedirection.
• Before removing the SD memory card, select “Not use” for “SD memory card” on the
[SD memory card] tab of the “Basic” page first. Turn off the power after “Not use” selection,
and then unload the SD memory card. When the SD memory card is inserted or removed with
the power on, data in the SD memory card may be damaged. (
☞ Operating Instructions
(included in the CD-ROM))
z Loosen the SD memory card slot cover fixing screw
using the bit for tamperproof screw (accessory), then
open the SD memory card slot cover.
x Insert an SD memory
card fully into the SD memory card
slot until a
click is heard.
c Close the SD memory card slot cover, and tighten the SD
memory card slot fixing screw to secure the cover.
(Recommended tightening torque: 0.78 N·m {0.58 lbf·ft})
IMPORTANT:
•EnsurethattheSDmemorycardslotcover'sfixing
screw is firmly secured.
Failure to observe this may cause water leakage or
malfunction.
v When removing the SD memory card, push in
the SD memory card until a click is heard after
executing step 1, then pull it out from the SD
memory card slot. After removing the SD mem-
ory card, close the SD memory card slot cover,
and tighten the SD memory card slot cover fix-
ing screw to secure the cover.
(Recommended tightening torque: 0.78 N·m {0.58 lbf·ft})
Insert/remove an SD memory card
SD memory card slot cover fixing screw
SD memory card slot cover
SD memory card slot
Label face upward