Filter
Top Products
27
CAUTION: After you select the Run Schedule function, any user
intervention will cancel the activation (i.e., pressing
remote or control button, powering off) and the schedule
will not take effect until you select this function again to
re-activate.
Run Schedule from Slideshow
1. Start a slideshow and press ENTER to select the Run Schedule
button when it appears in the lower left corner of the screen
(approx 10 sec).
2. To run the schedule when the
Run Schedule button is no longer
displayed, restart your slideshow and then press
ENTER to select
the
Run Schedule button when it appears.
3. The DPF will go into stand-by mode according to the schedule,
and when it resumes operation, the slideshow will again begin
to play.
Run Schedule from CALENDAR/CLOCK Screen
1. On the CALENDAR/CLOCK screen, press MENU.
2. Select
Run Schedule.
3. The DPF will go into stand-by mode according to the schedule,
and when it resumes operation, the
Calendar/Clock screen will
again be displayed.
A small timer clock will appear indicating the schedule is active,
and then the DPF will operate according to the set schedule.
Set Date and Time
1. On the CALENDAR/CLOCK screen, press MENU.
2. Select
Set Date/Time, and then select the options and use
to change the field values.
3. Select
Done.