Pelco 35X Security Camera User Manual


 
32 C3463M (10/09)
POWER UP
(Applies only to 27X and 35X models.)
POWER UP ACTION
This setting defines a specific activity (scan, preset, pattern) to be performed in the event the power to the dome is cycled.
The following settings are available:
NONE: No action.
AUTO (default): The dome resumes its prior activity or direction before the power outage.
AUTO SCAN: Dome starts auto scan operation.
RANDOM SCAN: Dome starts random scan operation.
FRAME SCAN: Dome starts frame scan operation.
PRESET 1: Dome goes to preset 1.
PRESET 2: Dome goes to preset 2.
PRESET 3: Dome goes to preset 3.
PRESET 4: Dome goes to preset 4.
PRESET 5: Dome goes to preset 5.
PRESET 6: Dome goes to preset 6.
PRESET 7: Dome goes to preset 7.
PRESET 8: Dome goes to preset 8.
PATTERN 1: Dome runs pattern 1.
PATTERN 2: Dome runs pattern 2.
PATTERN 3: Dome runs pattern 3.
PATTERN 4: Dome runs pattern 4.
PATTERN 5: Dome runs pattern 5.
PATTERN 6: Dome runs pattern 6.
PATTERN 7: Dome runs pattern 7.
PATTERN 8: Dome runs pattern 8.
(Only 27X and 35X models allow PATTERN 2 through PATTERN 8.)
EXIT
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
BACK
EXIT
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
<CLOCK>
<EVENT>
DOME SETTINGS
BACK
EXIT
POWER UP
POWER UP ACTION
*This setting applies only to Pressurized Spectra IV dome systems.