Filter
Top Products
C1302M-F (11/08) 5
Getting Started
Thank you for purchasing Pelco’s ExSite
®
Series explosionproof integrated positioning system. This manual includes instructions for installing all
the components of the ExSite Series system. Once the system installation is complete, refer to the operation/programming manual shipped with
the camera module for instructions on how to operate and program your system.
METHODS OF INSTALLATION
The system can be installed in a standard or inverted position. When installed for inverted operation, the camera oriention and controller
functions are reconfigured for normal operation through the system’s software. Hardware adjustment is not required for inverted operation.
Refer to Figure 1 for installation methods.
Figure 1. Methods of Installation
WARNING: Total weight of the pan and tilt component is 55 lb (25 kg). Use caution when lifting and assembling the pan and tilt
component on the power module. It is recommended that non-slip gloves be worn during installation.
STANDARD
INSTALLATION
INVERTED
INSTALLATION