Filter
Top Products
42 C2487M-A (4/05)
<Password>
Spectra III features password protection to prevent unauthorized changes to the dome settings.
An operator can open the System Information and Display Setup Screens, but cannot access any
of the Dome Settings menus.
Controller/keyboard commands cannot override password-protected settings. If a keyboard is
used to set a preset, pattern, or zone, the Enter Password screen appears on the monitor.
The password must be entered before programming can continue.
At least one character must be entered to create a valid password.
BACK
EXIT
ENABLE PASSWORD OFF
<EDIT PASSWORD>
PASSWORD
BACK
EXIT
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<ALERT>*
<CLEAR>
<PASSWORD>
DOME SETTINGS
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EDIT THE PASSWORD
----------
1234567890 OK
ABCDEFGHIJ CANCEL
KLMNOPQRST
UVWXYZ.,-/ SPACE
abcdefghij BACKSPACE
klmnopqrst
uvwxyz*;:
*This setting only applies to Pressurized
Spectra III dome systems with software
version 1.27 or higher.