Pelco DD53CBW18-X Security Camera User Manual


 
30 C2487M-B (11/05)
Power Up
POWER UP ACTION
This setting defines a specific activity (scan, preset, pattern) to be performed in the event the
power to the dome is cycled.
The following settings are available:
NONE No action.
AUTO SCAN Dome starts auto scan operation.
RANDOM SCAN Dome starts random scan operation.
FRAME SCAN Dome starts frame scan operation.
PRESET 1 Dome goes to preset 1.
PRESET 8 Dome goes to preset 8.
PATTERN 1 Dome runs pattern 1.
*This setting only applies to
Pressurized Spectra III dome
systems with software version
1.27 or higher.
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
BACK
EXIT
DOME SETTINGS
BACK
EXIT
POWER UP
POWER UP ACTION NONE