Pelco DD53CBW18-X Security Camera User Manual


 
C2487M-B (11/05) 45
*This setting only applies to Pressurized
Spectra III dome systems with software
version 1.27 or higher.
(See page 11)
Quick Programming Guide
Password
Spectra III features password protection to prevent unauthorized changes to the dome settings.
An operator can open the System Information and Display Setup Screens, but cannot access any
of the Dome Settings menus.
Controller/keyboard commands cannot override password-protected settings. If a keyboard is
used to set a preset, pattern, or zone, the Enter Password screen appears on the monitor.
The password must be entered before programming can continue.
At least one character must be entered to create a valid password.
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
BACK
EXIT
DOME SETTINGS
BACK
EXIT
ENABLE PASSWORD OFF
<EDIT PASSWORD>
PASSWORD
EDIT THE PASSWORD
----------
1234567890 OK
ABCDEFGHIJ CANCEL
KLMNOPQRST
UVWXYZ.,-/ SPACE
abcdefghij BACKSPACE
klmnopqrst
uvwxyz#&:*