Filter
Top Products
C2487M-B (11/05) 39
Alarms
Set the alarm contact:
1. Use the joystick to position the cursor beside ALARM CONTACT.
2. Press Iris Open. The cursor moves to the right.
3. Move the joystick up or down to view the following available selections.
N/O (default) Normally open
N/C Normally closed
4. Press Iris Open to enter selection.
NOTE: The alarm feature is functional only if the dome drive is installed in a Spectra III SE
back box.
*This setting only applies to Pressurized
Spectra III dome systems with software
version 1.27 or higher.
(See page 11)
Quick Programming Guide
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
BACK
EXIT
DOME SETTINGS
BACK
EXIT
ALARM CONTACT N/O
ALARMS