Filter
Top Products
C2443M-D (11/05) 19
BACK
EXIT
ADVANCED SETTINGS
SHUTTER SPEED AUTO
AGC LIMIT 27
AUTO IRIS AUTO
AUTO IRIS LEVEL 66
AUTO IRIS PEAK 8
AUTO SHARPNESS ON
SHARPNESS LEVEL 26
BACKLIGHT COMP OFF
VIDEO LEVEL HIGH
BACK
EXIT
TYPE OF LIGHTING OUTDOOR
AUTO FOCUS ON
ZOOM LIMIT X176
ZOOM SPEED MEDIUM
LOW LIGHT LIMIT 2
<ADVANCED SETTINGS>
CAMERA
Advanced Camera Settings
SHUTTER SPEED
Shutter speed is the duration of the electronic shutter. Program shutter speed to operate
automatically (Auto) or manually (Numeric Value).
AUTO (default) The electronic shutter speed is set automatically by the amount of
light sensed by the camera.
NUMERIC VALUE Spectra III SE dome system has several numerical shutter speed
settings. The higher the number, the faster the electronic shutter.
The slowest shutter speed setting is 2 = 1/2 second
The fastest setting is 30,000 = 1/30,000 second
Increasing the shutter speed lowers the light sensitivity and
reduces the streaking of fast moving objects.
NOTE: Set the shutter speed to 100 if you are using an NTSC camera in a 50 Hz environment.
This will eliminate any flicker that may occur in the picture.
AGC LIMIT
AGC Limit allows users to adjust how the system balances AGC (automatic gain control) and
electronic shutter in low light conditions. As scene lighting decreases, the system will
automatically adjust, adding a mixture of AGC and slow shutter according to the AGC LIMIT
setting. AGC LIMIT can be set between 0 and 40, with 40 applying maximum AGC before slow
shutter. In contrast, setting AGC LIMIT to 0 will force the system software to apply maximum
slow shutter (as defined by the LOW LIGHT LIMIT setting) before any AGC is applied. The default
setting of 28 sets the AGC and slow shutter balance to favor AGC, yielding more real-time low
light images.
NOTE: The maximum slow shutter that the system will achieve is 1/2 second shutter (refer to
the
Low Light Limit
section).
(See page 11)
Quick Programming Guide
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<TITLE TEXT>
<ALERT>*
<CLEAR>
<PASSWORD>
BACK
EXIT
DOME SETTINGS
*This setting only applies to Pressurized
Spectra III SE dome systems with
software version 1.25 or higher.