Filter
Top Products
98
Shooting Functions
4
The set values are displayed in the status screen and viewfinder and on
the LCD panel.
You can set the shutter speed and aperture value. This mode is suitable
to take pictures of your choice by combining them. This mode is
convenient for taking pictures using the same combination of the shutter
speed and aperture settings or taking intentionally underexposed (darker)
or overexposed (brighter) photographs.
• The shutter speed and aperture value can be set in increments of 1/3 EV or
1/2 EV. Set the exposure steps in [1. EV Steps] of the [A Custom Setting 1]
menu. (p.106)
•In L mode, the sensitivity is fixed to [ISO AUTO].
Using the a Mode
AF.S
1/
ISO
1000
100
4.5
F
11223344+5
-
5
AWB
[
37
]
TAv
AUTO
JPEG
16M
11
11
Exposure Warning
If the subject is too bright or too dark,
the sensitivity will blink on the status
screen and LCD panel and in the
viewfinder. In such situations, change the shutter speed and
aperture. When the indication stops blinking, you can take a picture
with proper exposure.
Use a commercially available ND (Neutral Density) Filter if the subject
is too bright. Use a flash if it is too dark.