Filter
Top Products
304
Appendix
11
4
Press the four-way controller (2)
to select [Mirror Up] and press
the 4 button.
The mirror is locked in the up position.
If you used Dust Alert to detect dust on
the sensor within the last 30 minutes, the
Dust Alert image appears on the monitor.
Clean the sensor while checking the
location of the dust.
5
Clean the CMOS sensor.
Use a brush-less blower to remove dirt
and dust from the CMOS sensor. Using a
blower with a brush may scratch the
CMOS sensor. Do not wipe the CMOS
sensor with a cloth.
6
Turn off the camera.
The mirror automatically returns to its original position.
7
Attach the lens or body mount cover.
Sensor Cleaning
Cancel
Mirror Up
Raises mirror and opens shutter
for access to clean sensor.
Turn the power off to finish
OK
OK