Filter
Top Products
185
6
Shooting Settings
6
Press the 4 button.
The camera is ready to take a picture.
You can adjust the white balance depending on the light source when
taking pictures. Up to three settings can be saved.
1
Select K in Step 2 on p.184 and press the four-way
controller (5).
2
Use the four-way controller
(23) to select K1 to K3 and
press the four-way controller
(5).
3
Under the light to measure the
white balance, fully display a
white sheet of paper in the
viewfinder or select a white area
as the subject.
• The camera automatically performs fine-tuning even when the light source is
specified. The color temperature of the light source is fixed when [10. WB
Adjustable Range] is set to [Fixed] in the [A Custom Setting 2] menu.
• Because the light source changes when a flash discharges, you can set the
white balance for when the flash discharges. Select [Auto White Balance],
[Unchanged] or [Flash] in [11. WB When Using Flash] of the [A Custom
Setting 2] menu.
Adjusting the White Balance Manually
Cancel Check
White Balance
Manual 1
OK
OK
MENU
AE.L
CTE
K1
1
3
2
1
Cancel Check
Manual
White Balance
Adjust
OK
OK
MENU
SHUTTER
GG
BBA
A
A
MM
±0 ±0
±0
AE.L
1
1