Filter
Top Products
198
7
Settings
5
Press the 4 button.
The setting is saved.
You can transfer images to your computer automatically via wireless
LAN using an Eye-Fi card. Refer to “Transferring Images Using an Eye-
Fi Card” (p.221) for details on how to transfer images. The default setting
is P (Off).
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Eye-Fi].
3
Use the four-way controller (45)
to select O or P.
O Starts transferring using the Eye-Fi
card
P Does not transfer using the Eye-Fi
card
4
Press the 3 button.
The camera returns to A mode or Q mode.
The images will be transferred automatically.
Depending on the country or region, images and sound files may fail to
be played back if the video output format is set differently from the one
in use there. If this happens, change the video output format setting.
Connecting the Camera to AV Equipment 1p.154
Video output format of each city 1p.235
Setting the Eye-Fi Communication
Setting
Video Out
Eye-Fi
2/3
MENU
Exit
NTSC
Power Saving
Auto Power Off
Reset
5
sec.
Brightness Level
3
min.