Filter
Top Products
94
3
Taking Pictures
* When [Shake Reduction] in the [ARec. Mode] menu is set to [CCD-Shift]
(p.116), the CCD shifting sound may occur during shooting. This is not a
malfunction.
1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2
Use the four-way controller (45)
to select, j, A, B or C and
press the 4 button.
The camera is ready to take a series of
pictures.
3
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
4
Press the shutter release button fully.
Pictures are taken continuously as long as you keep the shutter
release button pressed.
A
Burst
Shooting(L)
The number of recorded pixels is fixed at f (2592×1944) and
pictures are taken consecutively. The interval between shots
becomes shorter in the following sequence: A, B, and C.
B
Burst
Shooting(M)
C
Burst
Shooting(H)
*
The number of pictures that can be taken consecutively and the frame
rate per second vary depending on the shooting condition.
Shutter release
button
Four-way controller
4 button
OK
OK
OK
OK
MENU
Cancel
Cancel
Cancel
MENU
Cancel
Cancel
Cancel
MENU
Cancel
Cancel
Cancel
MENU
Cancel
Cancel
Cancel
MENU
Cancel
Cancel
Cancel
Drive Mode
Drive Mode
Continuous Shooting
Continuous Shooting
Drive Mode
Continuous Shooting