Pentax 175743 Digital Camera User Manual


  Open as PDF
of 150
 
3
Changing Camera Settings
110
Setting the Information Displayed in Shooting Mode
Youcansettheinformationdisplayedforeachnumberofpressesofthe
DISP. button in shooting mode.
1 Select [DISP. Button Display Setting] in the [Setup] menu and
then press the $ button.
The [DISP. Button Display Setting] screen appears.
2 Use the #$ buttons to set [Use DISP.
Screen].
O1 to O3 to indicate the number of but-
ton presses, and OOff indicates the picture
display is off.
3 Use the ADJ. lever to enable or disable
a setting.
A setting without a check mark is disabled (the information is not displayed).
For the setting in the diagram, there are three display patterns for when the
DISP. button is pressed. O1 cannot be disabled.
4 Use the !"#$ buttons to select a display item and then use
the ADJ. lever to turn it ON/OFF.
Graphic Display Displays the values that can be set at the bottom of the screen while the aper-
ture and shutter speed are being changed.
Information Display Displays symbols for the shooting mode, settings, etc.
Grid Guide Displays guidelines for shooting.
Selectthetypeofgridin[GridGuideDisplayOptions]ofthe[Setup]menu.
Level Indicator Displays an indicator for confirming camera tilt.
Histogram Displays a histogram.
5 Press the MENU/OK button.
The [Setup] menu reappears.
 previous next