Filter
Top Products
Before You Begin
23
Getting Ready
Prepare the camera for use.
Inserting the Battery and a Memory Card
Be sure the camera is off before inserting or removing the battery and mem-
ory card.
SD memory cards, SDHC memory cards, and SDXC memory cards can be
used with this camera. (“Memory card” refers to these memory cards in this
guide.)
1 Slide the release lever on the bottom of the
camera toward OPEN to open the battery/
card cover.
2 Make sure the memory card is facing the
right way and then push the card all the
way in until it clicks.
To remove it, press in the memory card and then re-
lease your hand.
3 Insert the battery.
Usethebatterytopressthelatchandinsertthebat-
tery all the way into the battery compartment.
To remove the battery, press and slide the latch.
4 Close the battery/card cover and slide the
release lever in the opposite direction of
OPEN to lock it in place.
1
2
1
2