Filter
Top Products
122
6
Editing / Settings
How to recall the [B Set-up] menu
You can register the functions you use most frequently on the four-way controller.
The functions can then be set directly by pressing the four-way controller without
displaying the [Rec.Mode] menu.
1 Select [Fn Setting] on the [B Set-up] menu.
2 Press the four-way controller (5).
The Fn Setting screen will be displayed.
3 Use the four-way controller (23) to choose the key where
you want to register a function.
4 Use the four-way controller (45) to choose the function you
want to register.
If you do not want to register a function, select Off.
5 Press the OK button twice.
The camera is ready to capture or play back images.
Registering Functions
Registering a function
• Only one function can be registered on each key of the four-way controller.
• You can choose from the following 12 functions: Recorded Pixels, Quality
Level, White Balance, Focusing Area, AE Metering, Sensitivity, Flash
Exposure Compensation, Digital Zoom, Instant Review, Sharpness,
Saturation Contrast.
• In the default setting, a negative level of Flash Exposure Compensation is
registered for (4) and a positive level of Flash Exposure Compensation is
registered for (5).
• If the Flash Exposure Compensation is registered to either (2) or (3),
levels are compensated positively for (2) and negatively for (3).
Menu / Fn button
Rec. Mode
Wide
AWB
Auto
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
Exit
1/3
MENU
OK
OK
2592 1944
Recorded Pixels
Four-way controller
OK button